OFFERGet 20% off forever at Endurance Nodes with code FOUNDERS2026!See all our plans
Connection & updates

Hytale server port 5520, UDP and slow connections

Adapted from the official Hytale server manual Reviewed November 16, 2026 3 min read

Hytale doesn't connect like Minecraft: it uses the QUIC protocol over UDP, on port 5520 by default. This guide covers the port on our servers, what UDP changes for firewalls and port tests, and a known Windows driver issue that slows some players down on every server.

The port: 5520 and --bind

By default a Hytale server listens on port 5520 (0.0.0.0:5520), over UDP. It can be changed with the --bind startup argument.

The facts (official manual)

  • Hytale uses the QUIC protocol over UDP, not TCP.
  • The default port is 5520; --bind changes the address and port the server listens on.
  • Behind a home router you'd forward UDP 5520; TCP forwarding is not required.

On our servers

The port is assigned when your server is created and shown in the panel. The startup command already uses it, so you don't need --bind. Players connect with the address and port shown in the panel.

Worth knowing

If a guide tells you to open TCP 5520 or forward ports in your router, that's for hosting at home. It doesn't apply to a hosted server.

UDP, not TCP

Hytale servers talk to players over the QUIC protocol, which runs on UDP. The default port is 5520, and TCP forwarding isn't required.

Minecraft vs Hytale networking

Minecraft JavaHytale
ProtocolTCPQUIC over UDP
Default port255655520
TCP needed?YesNo

What it means in practice

  • Any firewall rule or port forward has to allow UDP, not TCP.
  • Tools that test a port with TCP will say it's «closed» even when the Hytale server works fine.
  • On our servers the port is already open on the node; you don't have to configure anything.
Worth knowing

The official manual mentions that symmetric NAT setups can cause problems for players. That concerns players hosting at home, not a server in a data centre.

Slow connection on Windows

Hypixel's support documents an issue where some Windows PCs with Intel or Realtek network cards get a slow or unstable connection in Hytale, because of how their drivers handle QUIC traffic. If a player has trouble on every server, not just yours, this is worth checking.

How to confirm it

Hypixel suggests trying a USB Ethernet adapter. If the problem disappears with it, the built-in network card's driver is the cause.

Driver settings to change

  1. Open the adapter's properties

    Device Manager → Network adapters → your card → Properties → Advanced.

  2. Disable «Priority & VLAN»

    The setting Hypixel's article names first.

  3. Disable «Recv Segment Coalescing»

    Both the IPv4 and IPv6 versions, if present.

  4. If it persists

    Also try disabling Energy-Efficient Ethernet, ARP Offload, Flow Control and Green Ethernet.

Worth knowing

These are settings on the player's own PC. Nothing on the server needs to change.

About this guide: An original guide from the EnduranceNodes team, written for the servers we host. If a step no longer matches what you see, tell us and we will update it.